Reinforced plastic tarpaulin sheet of 4 x 5 metres (finished size).
Area of use
Mainly for temporary human shelter or other personal protection purposes.
Made in woven high density polyethylene fibres. Wrap x weft: 12/14 per square inch, laminated on both sides with low density polyethylene, with reinforced rims by heat sealing on all sides (or 2 sides heat sealing and 2 sides double stitching), and nylon ropes in hem, 100 dernier minimum. Waterproof and stabilized against ultraviolet rays and excess heat for long outdoor exposure for approx 2 years in tropical climate. Strong metal eyelets on 4 sides of the sheets at 100 cm + or Ã¢â¬â 5cm centre to centre
Tensile strength and elongation
Minimum 600N both directions of wrap and weft (BS2576, 25mm grabtest or equivalent). Bursting strength: minimum 200N/cm2 (BS 4768 or equivalent) Minimum 10 DaN under ISO 1421 outside of the reinforcement bands.
Minimum 100N both directions (BS 4303 or equivalent)
Maximum 5% loss on original tarpaulin tensile strength under Iso1421 after 1500 hours UV under ASTM G53/94 (UVB 313 nm peak), to be tested outside and inside the reinforcement bands.
4m standard size.
Sheets of 5 metres and rolls of 50m (tolerance in size +/- 5% only).
From 190g/m2 +/-5%, plus 10% for the reinforcement bands under ISO3801.
Flash point above 200C.
Grey on one side. White on the reverse side.
Logos to run lengthwise through the entire roll, at intervals of 30cm and maximum 75cm.
In bales of 5 sheets, secured with polyester brands.
Plot No.431, Santej, Varasar Road, Santej, Ahmedabad, Gujarat, 382721, India