Woven Flexible Tarpaulin

Being a prominent firm in this domain, we are engaged in manufacturing, exporting and supplying a wide assortment of Woven Flexible Tarpaulin. Under the observation of our deft professionals, this tarpaulin is manufactured using quality approved raw materials with the aid of progressive machines. The provided tarpaulin is mainly used for making temporary human shelter or covering vehicles. In addition to this, the offered Woven Flexible Tarpaulin can be bought from us at market leading prices by our prestigious clients.  

Key Points:

• Size	Reinforced plastic tarpaulin in 4m x 6m sheet or 4m x 60m roll
  Material	Woven high-density polyethylene (HDPE) black fibers fabric, fabric laminated on both sides with white low density polyethylene (LDPE) coating, reinforced with 6 bands of 75 mm width woven black HDPE fibers fabric and coated with grey LDPE on the outside. Pre-punched 8mm holes on the 2 side bands at 0.1m +/-10% intervals, positioned in the Centre of the bands (only the reinforcement bands are pre-punched, not the tarpaulin itself).
  Weight	190 ± 20g under ISO 3801 (equivalent to min 170 to 210 gsm max)
  Tensile strength	Min 500N, 15-25% elongation in warp and weft in plain sheet under ISO 1421-1
  Reinforcement bands	Min 700N as per ISO 1421-1, pulling lengthwise in a pre-punched 8mm hole with a hook of 8 mm wire diameter, at 200mm from the end of the band. UV resistance 80% of original value and not less than 665N.
  Tear strength	Min 100N under ISO 1421outside of the Reinforcement Bands.
  UV resistance	After 1500 hours UV under ASTM G53/94 (UVB 313 nm peak) minimum 80% of original value of the actual product and not less than 475N
  Welding	Only 1 welding lengthwise.