HDPE Tarpaulins

Ideal to be used for shading purpose. Highly durable and easily reusable. Perfect finish with uniform thickness. Available in multitude of colors and dimensions. Tear and moisture resistance.

Size Reinforced plastic tarpaulin in 4m x 6m sheet or 4m x 60m roll Material Woven high-density polyethylene (HDPE) black fibers fabric, fabric laminated on both sides with white low density polyethylene (LDPE) coating, reinforced with 6 bands of 75 mm width woven black HDPE fibers fabric and coated with grey LDPE on the outside. Pre-punched 8mm holes on the 2 side bands at 0.1m +/-10% intervals, positioned in the Centre of the bands (only the reinforcement bands are pre-punched, not the tarpaulin itself). Weight 190 20g under ISO 3801 (equivalent to min 170 to 210 gsm max) Tensile strength Min 500N, 15-25% elongation in warp and weft in plain sheet under ISO 1421-1 Reinforcement bands Min 700N as per ISO 1421-1, pulling lengthwise in a pre-punched 8mm hole with a hook of 8 mm wire diameter, at 200mm from the end of the band. UV resistance 80% of original value and not less than 665N. Tear strength Min 100N under ISO 1421outside of the Reinforcement Bands. UV resistance After 1500 hours UV under ASTM G53/94 (UVB 313 nm peak) minimum 80% of original value of the actual product and not less than 475N Welding Only 1 welding lengthwise.

High performance Robust construction Rugged design Waterproof and durable At industry leading price

Key Points: Resistant to moisture Easy to use Tear resistance Light weight

Thickened and round edges Sturdy plastic corners that increase tear resistance and enhance easy binding with ropes Finely finished surface with uniform thickness Colorfastness and abrasion resistance Ability to withstand bad weather conditions

Allow secure shipment of goods by providing excellent protection against rains and sunlight Tear and chemical resistance Easy to fold and unfold Defect free in nature Perfectly finished surface to prevent any kind of damage to packaged materials

Size Reinforced plastic tarpaulin in 4m x 6m sheet or 4m x 60m roll Material Woven high-density polyethylene (HDPE) black fibers fabric, fabric laminated on both sides with white low density polyethylene (LDPE) coating, reinforced with 6 bands of 75 mm width woven black HDPE fibers fabric and coated with grey LDPE on the outside. Pre-punched 8mm holes on the 2 side bands at 0.1m +/-10% intervals, positioned in the Centre of the bands (only the reinforcement bands are pre-punched, not the tarpaulin itself. Weight 190 20g under ISO 3801 (equivalent to min 170 to 210 gsm max. Tensile strength Min 500N, 15-25% elongation in warp and weft in plain sheet under ISO 1421-1 Reinforcement bands Min 700N as per ISO 1421-1, pulling lengthwise in a pre-punched 8mm hole with a hook of 8 mm wire diameter, at 200mm from the end of the band. UV resistance 80% of original value and not less than 665N. Tear strength Min 100N under ISO 1421outside of the Reinforcement Bands. UV resistance After 1500 hours UV under ASTM G53/94 (UVB 313 nm peak) minimum 80% of original value of the actual product and not less than 475N Welding Only 1 welding lengthwise.

Key Points: Seamless finish Easy to use Very light in weight

GCIL Geomembrane includes a proprietary technology that has been proven to provide superior welding characteristics & industry leading resistance to stress cracking. Equaled hydrostatic resistance due to our proprietary five layer construction. Environmentally responsible recovery and recycling program. Puncture and abrasion resistant construction with high strength Polyolefin woven scrims that provide superior dimensional stability. Outstanding UV, ozone & oxidation resistance. Non-toxic, no PVC or other hazardous materials used in construction of fabric. Low water vapor permeance.